Performance Features

• Chlorine-free R-134a HFC refrigerant.
• Low energy consumption during part load and full load operation.
• Inverter-driven twin-rotor screw compressors allow precise capacity matching of building load changes and significantly reduce unit power input, especially at part-load.
• Flooded multi-pipe heat exchangers for increased heat exchange efficiency.
• Leaving-fluid temperature directly controlled to within 0.5° F (0.3° C).
• Entering-fluid temperature continuously monitored to detect flow or load changes.
• Compatible with multi-protocol communication links to shipboard automation.
• Electronic expansion device permits operation at a lower condensing pressure and improved utilization of the evaporator heat exchange surface.

Reliability Features

• Dual independent refrigeration circuits (from 1000 kW and up).
• Low voltage control circuits.
• Short cycle protection.
• Dual chiller control.
• Temperature reset from return fluid.
• Electronic paddle-free flow switch, pre-installed on evaporator.
• Electronic refrigerant gauges.
• Heat exchangers available with class approval (DNV-GL, BV, LR).

Maintenance Features

• Hermetic twin screw compressors.
• Mechanically cleanable condenser and evaporator.
• Alarm contacts.
• Filter drier.
• Moisture indicating sight glass.
• Touch Pilot control provides easy access to most unit operating parameters.
• Remote management capabilities.

Installation Features

• Unit width of approximately 1.25 m (4 feet) up to 1000 kW (280 tons).
• Main disconnect switch with high trip capacity.
• Transformer supply to the integrated control circuit.

Standard Warranty

• Commercial marine warranty 18 months after shipment or 12 months after commissioning.
• Extended warranties available.